But if you find the same answers for all the Module anywhere in the internet.
And if you have an Answers are correct 100% or if you find an answer, What is wrong in this blog. please send me. (Post in blog or Send Email )
Because,I will update the blog…

Friday, October 5, 2007

Module 7 Exam Answers



1. Which Ethernet standard does the IEEE 802.3 standard recommend for backbone installations?
• 10BASE-T
• 100BASE-T
• 100BASE-FX
• 1000BASE-LX

2. Which statements describe Gigabit Ethernet technology? (Choose two.)
• operates at 100 Mbps
• typically used for backbone cabling
• requires shielded twisted-pair cabling
• can be implemented over copper and fiber

• primarily used between workstations option

3. Which of the following are Fast Ethernet technologies? (Choose two.)
• 100BASE-5
• 100BASE2
• 1000BASE-F
• 100BASE-FX
• 100BASE-TX


4. To make sure timing limitations are not violated when implementing a 10 Mbps Ethernet network involving hubs or repeaters, a technician should adhere to which rule?
• the 4-5-3 rule
• the 6-4-2 rule
• the 3-4-5 rule
• the 5-4-3 rule

5. At which OSI layer do the differences between standard Ethernet, Fast Ethernet and Gigabit Ethernet occur?
• physical layer
• data link layer
• network layer
• transport layer

6. How does 1000BASE-T use the UTP wire pairs to accomplish transmission?
• two pairs are used to transmit and two pairs are used to receive
• one pair is used to transmit, one pair is used to receive, one pair is used for clocking, and one pair is used for error correction
• all four pairs are used in parallel by both hosts to transmit and receive simultaneously
• two pairs of wires are used as in 10BASE-T and 100BASE-TX

7. What RJ-45 pins are unused when transmitting and receiving data in an Ethernet 100BASE-T Category 5 UTP cable? (Choose two.)
• 1 and 2
• 3 and 6

• 4 and 5
• 7 and 8


8. What is the maximum distance that 10BASE-T will transmit data before signal attenuation affects the data delivery?
• 100 meters
• 185 meters
• 300 meters
• 500 meters

9. Which media types can be used in an implementation of a 10BASE-T network? (Choose three.)
• Category 5 UTP
• Category 5e UTP
• Category 3 UTP

• coaxial cable
• multi-mode fiber
• single mode fiber

10. Which of the following Ethernet technologies are considered legacy Ethernet? (Choose three.)
• 10BASE2
• 10BASE5
• 10BASE-T

• 100BASE-T
• 100BASE-FX
• 100BASE-TX

No comments :